METAL WORKING FLUIDS

Total Spirit 5000 is a water-based fluid that is designed for general machining and grinding. It is optimized for cast iron, steels, and aluminum. Total Spirit 5000 helps limit deposit formation, which can improve competitiveness. It also has excellent corrosion protection properties and is suitable for a wide range of water hardness.

Total Valona MQL 3036 BIO is a chlorine-free, vegetable-based oil that’s designed for spray lubrication. It’s suitable for machining operations on ferrous and non-ferrous metals, especially aluminum alloys. It can be used in Minimum Quantity Lubrication (MQL) systems.

Total Valona MQL 3036 BIO is a chlorine-free, vegetable-based oil that’s designed for spray lubrication. It’s suitable for machining operations on ferrous and non-ferrous metals, especially aluminum alloys. It can be used in Minimum Quantity Lubrication (MQL) systems.

Multidraw ALS 40 is a non-water-miscible, fully synthetic drawing oil from Zeller+Gmelin. It contains a high content of synthetic greasing agents, EP additives, and anti-aging. Multidraw ALS 40 can be used for chipless forming of aluminum, steel, and zinc coated.

Total Martol LVG 5 CF is a fast-drying, chlorine-free, and aromatic-free metalworking oil. It has InS H1 accreditation for incidental food contact. It’s suitable for forming and assembly techniques and can be used for light to severe die-stamping operations. It leaves no residue after evaporation.

Rust-Veto 76-HF is a rust preventive that protects a variety of metals and alloys. It contains a new additive system that displaces moisture on metal. Rust-Veto is an industrial grease or light mineral oil that leaves a protective film on metal surfaces. It contains powerful rust inhibitors and is necessary to lift or displace water during storage.

Multicut Micro SP 51 is a synthetic-based, non-water-miscible metalworking oil. It contains sulfurous additives and is designed for use in micro spraying technology. Multicut Micro SP 51 is particularly suitable for cutting steel and aluminum.

Zeller+Gmelin’s Multiroll CU Protect is an additive that prevents corrosion for the Multiroll CU product line. It’s a fully synthetic, water-soluble drawing lubricant for copper and aluminum wire. It can be sprayed on to help with winding up the wire.

Divinol Thermosure OS 25 is a heat transfer fluid from Zeller+Gmelin. It’s a premixed water-glycol mixture based on ethylene-glycol. It’s free of nitrite, amine, phosphate, and borate. It can be used in a wide temperature range.

Divinol Thermosure OS 25 is a heat transfer fluid from Zeller+Gmelin. It’s a premixed water-glycol mixture based on ethylene-glycol. It’s free of nitrite, amine, phosphate, and borate. It can be used in a wide temperature range.