SOLVENTS

Whitaker Mineral Spirits Rule 66 is a petroleum distillate that can be used as a paint thinner and mild solvent. It can be used indoors without harsh fumes and is a good cleaner for brushes and equipment. It can be used to thin and blend oil-based paint, stain, and varnish. It dries with minimal residue.

Whitaker Mineral Spirits Rule 66 is a petroleum distillate that can be used as a paint thinner and mild solvent. It can be used indoors without harsh fumes and is a good cleaner for brushes and equipment. It can be used to thin and blend oil-based paint, stain, and varnish. It dries with minimal residue.

Whitaker Odorless Mineral Spirits are a paint thinner that is distilled from petroleum. They are also known as “white spirits” and are a less expensive, less sticky, and less offensive-smelling alternative to turpentine.

LPA 142 is a clear, low-odor solvent with a medium flash point. It’s also known as paraffinic naphthenic solvent or aliphatic solvent.

Low Odor Base Solvent is a liquid industrial chemical solvent. It has a boiling point of 200–300°C (392–572°F) and an auto ignition temperature of over 220°C (428°F). It does not contain any chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

Whitaker Acetone is a solvent that can be used to thin and clean epoxies, fiberglass, resins, and adhesives. It can also be used to dissolve two-part epoxies and superglue before they harden. Whitaker Acetone can also be used as a heavy-duty degreaser and to remove residue.

ACTICIDE CBM 2 is an industrial microbiocide, algicide, and fungicide. It is a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one (1%), 2-methyl-4-isothiazolin-3-one (5%), and 1,2-benzisothiazolin-3-one (10%). Thor GmbH warrants that the product conforms to its chemical description and is reasonably fit for the purpose stated on the label.

Low Odor Base Solvent is a liquid industrial chemical solvent. It has a boiling point of 200–300°C (392–572°F) and an auto ignition temperature of over 220°C (428°F). It does not contain any chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

ShellSol D60 is a medium evaporating, high flash mineral spirit type hydrocarbon solvent. It is a petroleum-based product with a flashpoint of 63°C and a boiling range of 182-222°C. It has an aromatic content of 0.2% and a specific gravity of 0.77.

Rustlick Triadine 20 is an industrial microbiostat that is used to treat bacteria and fungus in metalworking fluids. It is a broad-spectrum antimicrobial that can quickly combat bacteria and fungi. Rustlick Triadine 20 is non-chlorinated and safe for use on titanium. It can protect against odors, clogged filters, and fluid breakdown. It can also extend the life of metalworking fluids.