METAL WORKING FLUIDS

Houghton Ensis DWO 962 is a solvent-based corrosion protection product for metal surfaces. It has dewatering properties and leaves an oily film that prevents sticking after it dries. It is suitable for metal surfaces that are likely to corrode in storage or use.

Houghton Dasco Guard 1917 is an oil-based rust preventive.

Multidraw KTL N 16 LM is a mineral oil-based drawing and punching oil from Zeller+Gmelin. It is non-water-miscible and contains synthetic greasing agents, corrosion inhibitors, and EP-additives. It is free from silicone oils and evaporates almost without any residues. Multidraw KTL N 16 LM is especially suitable for chipless sheet metal forming of aluminum.

Zeller+Gmelin developed Multicut Flowgrind P 32 as a precision deburring product for the Bosch Group. Multicut Flowgrind P 32 is a lubricating oil that carries abrasive materials. It is zinc-free and chemically activated.

Zeller+Gmelin’s Multidraw KTL N 08 is a coil and circuit board washing oil. It comes in a red 20 liter canister.

Zubora 65 H Ultra is a high-performance, water-miscible, semi-synthetic cooling lubricant. It is boron-free and based on mineral oil. It is suitable for the most difficult cutting operations and is used by manufacturers such as Bosch Rexroth.

Multidraw WM Spezial is a water-miscible drawing oil concentrate from Zeller+Gmelin. It’s based on mineral oil and is free of chlorine-containing components. It also contains natural greasing agents and a special corrosion inhibitor.

Zubora 65 H Extra is a water-miscible, semi-synthetic, high-performance cooling lubricant. It is boron-free and based on mineral oil. The special formulation makes it particularly bio-stable.

Zeller+Gmelin Zubora 10 H Plus is a water-miscible cooling lubricant that is suitable for grinding. It is inhibited against the formation of nitrosamines.
Zubora 10 H Plus is a semi-synthetic, high performance cooling lubricant. It is free of formaldehyde releasers.

Zeller+Gmelin’s Multicut Basic 20 Extra is a non-water-miscible, high-alloyed cutting oil with low viscosity. It’s made from mineral oils with low aromatic content.