METAL WORKING FLUIDS

Houghton Garia 631 S-32 is a dark-colored, heavy-duty cutting oil. It’s designed for difficult machining operations such as threading, tapping, and broaching. It’s a dark, active sulfur oil that’s formulated using severely hydroprocessed.

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Houghton Dasco Spark 1010 is a general-purpose oil for use in electrical discharge machines (EDMs). It’s designed to offer the best efficiency for a broad range of applications.

Houghton Cut-Max 570 is a cutting oil with a high chlorine content. It has anti-welding and extreme pressure characteristics. It can make machining faster and easier, and provide a better finish for nickel alloys.

Houghton Cut-Max 570 is a cutting oil with a high chlorine content. It has anti-welding and extreme pressure characteristics. It can make machining faster and easier, and provide a better finish for nickel alloys.

Houghton Adrana D 408 is a water-miscible metalworking fluid. It is recommended for light to medium duty operations on a variety of materials, including cast iron and steel. It is also suitable for machining copper alloys.

Houghton Adrana D 408 is a water-miscible metalworking fluid. It is recommended for light to medium duty operations on a variety of materials, including cast iron and steel. It is also suitable for machining copper alloys.

Houghton Metalina D 200 is a free, fully synthetic coolant. It is a water-miscible, transparent coolant.

Shell Garia 623CS-52 is a lubricant that can handle difficult operations and machine difficult metals and alloys. It can be used in bulk gallons and is available from Taylor Lubricants and Kemko Aerospace.
Shell Garia products should not be used where staining of copper and its alloys is a concern. They offer outstanding lubrication performance under severe operating conditions.

Soluble Oil D is a general-purpose soluble oil. It’s formulated with base oils, coupling agents, and a high level of emulsifiers. Soluble oils are used as coolants and lubricants in many industrial applications, including metalworking and machinery. They’re also known as cutting oils, suds, cutting fluid, cutting compound, coolant, or lubricant.