METAL WORKING FLUIDS

Multidraw KTL N 16 LM is a mineral oil-based drawing and punching oil from Zeller+Gmelin. It is non-water-miscible and contains synthetic greasing agents, corrosion inhibitors, and EP-additives. It is free from silicone oils and evaporates almost without any residues. Multidraw KTL N 16 LM is especially suitable for chipless sheet metal forming of aluminum.

Zeller+Gmelin developed Multicut Flowgrind P 32 as a precision deburring product for the Bosch Group. Multicut Flowgrind P 32 is a lubricating oil that carries abrasive materials. It is zinc-free and chemically activated.

Zeller+Gmelin’s Multidraw KTL N 08 is a coil and circuit board washing oil. It comes in a red 20 liter canister.

Zubora 65 H Ultra is a high-performance, water-miscible, semi-synthetic cooling lubricant. It is boron-free and based on mineral oil. It is suitable for the most difficult cutting operations and is used by manufacturers such as Bosch Rexroth.

Multidraw WM Spezial is a water-miscible drawing oil concentrate from Zeller+Gmelin. It’s based on mineral oil and is free of chlorine-containing components. It also contains natural greasing agents and a special corrosion inhibitor.

Zubora 65 H Extra is a water-miscible, semi-synthetic, high-performance cooling lubricant. It is boron-free and based on mineral oil. The special formulation makes it particularly bio-stable.

Zeller+Gmelin Zubora 10 H Plus is a water-miscible cooling lubricant that is suitable for grinding. It is inhibited against the formation of nitrosamines.
Zubora 10 H Plus is a semi-synthetic, high performance cooling lubricant. It is free of formaldehyde releasers.

Zeller+Gmelin’s Multicut Basic 20 Extra is a non-water-miscible, high-alloyed cutting oil with low viscosity. It’s made from mineral oils with low aromatic content.

Houghton MarTemp 355 is a high-performance, accelerated hot quenching oil. It’s designed for hot oil quenching applications where a high cooling rate is needed to achieve the optimum hardness and physical properties. It’s suitable for use at temperatures of up to 375oF (190oC).

Houghton Dascolene 617 is a cutting and grinding fluid that is used on moderately machinable metals, including aluminum and alloyed steels. It is a universal, chlorine-free oil that can provide lubrication and cutting. It is based on hydro-treated mineral oil with a low aromatic content.